Our Services

WJA electron provides a number of services for electron microscopy equipment, as well as specialist service for electron sources and other specialized services.

Our Services

WJA electron provides a number of services for electron microscopy equipment, as well as specialist service for electron sources and other specialized services.

Electron Microscopy
Electron Source
Other Services

SEM, TEM CDSEM, Defect Review SEM and e-beam lithography. 
We specialize in the installation, decommissioning, servicing, and repair of a wide range of high-tech equipment from manufacturers such as Jeol, FEI/Philips, Hitachi, and KLA-Tencor. Our services also extend to upgrading equipment for enhanced reliability or specialized requirements, either as standalone upgrades or part of comprehensive refurbishment packages.

Key Services and Upgrades:

  • SEM, TEM, CDSEM, Defect Review SEM, and E-beam Lithography: We provide full service and maintenance for these equipment types, ensuring optimal performance.

  • Upgrades:

    • Vacuum System Upgrade for KLA-Tencor 8XXX & eCD Series CDSEMs: A specialized upgrade including an electron source bypass valve for quick on-site electron source emitter changes.
      Benefits: Lower cost of ownership, higher vacuum reliability, and ease of maintenance.

    • Digitization of Analogue SEM: Bringing older analogue SEMs into the modern era by digitizing their scan and image acquisition systems.
      Benefits: Enhanced image acquisition, improved visual imaging, faster alignment, more accurate scan calibration, and reduced time to publish images.

FEG / Schottky emitter electron source

WJA Electron offers a wide range of parts and consumables for field emission electron sources. We also provide comprehensive rebuild and alignment services for various electron sources, offering two options:

  1. Partial Rebuild:

    • Customers can install and bake the source themselves.
    • Available for most field emission sources, with a specialization in KLA-Tencor CDSEM electron sources, Jeol JWS electron sources, and FEI SFEG modules.
  2. On-site Electron Source Rebuild:

    • Complete rebuild for KLA-Tencor CDSEM and Jeol JWS models, with other systems available upon request.
    • Non-OEM electron source replacements are also available, offering easier in-house refurbishment.

    Custom-designed bake-out equipment is available upon request for these services.

Additionally, we offer power supply/controller repair services. Please contact us for more details on this.

WJA Electron provides the following additional services:

  • Equipment Condition Reports

  • Decommissioning and Shipping Preparation

In conjunction with BOK-OPT, WJA Electron also offers backend semiconductor services, including probe card and load board services.

Electron Microscopy
Electron Source
Other Services

SEM, TEM CDSEM, Defect Review SEM and e-beam lithography. 
We specialize in the installation, decommissioning, servicing, and repair of a wide range of high-tech equipment from manufacturers such as Jeol, FEI/Philips, Hitachi, and KLA-Tencor. Our services also extend to upgrading equipment for enhanced reliability or specialized requirements, either as standalone upgrades or part of comprehensive refurbishment packages.

Key Services and Upgrades:

  • SEM, TEM, CDSEM, Defect Review SEM, and E-beam Lithography: We provide full service and maintenance for these equipment types, ensuring optimal performance.

  • Upgrades:

    • Vacuum System Upgrade for KLA-Tencor 8XXX & eCD Series CDSEMs: A specialized upgrade including an electron source bypass valve for quick on-site electron source emitter changes.
      Benefits: Lower cost of ownership, higher vacuum reliability, and ease of maintenance.

    • Digitization of Analogue SEM: Bringing older analogue SEMs into the modern era by digitizing their scan and image acquisition systems.
      Benefits: Enhanced image acquisition, improved visual imaging, faster alignment, more accurate scan calibration, and reduced time to publish images.

FEG / Schottky emitter electron source

WJA Electron offers a wide range of parts and consumables for field emission electron sources. We also provide comprehensive rebuild and alignment services for various electron sources, offering two options:

  1. Partial Rebuild:

    • Customers can install and bake the source themselves.
    • Available for most field emission sources, with a specialization in KLA-Tencor CDSEM electron sources, Jeol JWS electron sources, and FEI SFEG modules.
  2. On-site Electron Source Rebuild:

    • Complete rebuild for KLA-Tencor CDSEM and Jeol JWS models, with other systems available upon request.
    • Non-OEM electron source replacements are also available, offering easier in-house refurbishment.

    Custom-designed bake-out equipment is available upon request for these services.

Additionally, we offer power supply/controller repair services. Please contact us for more details on this.

WJA Electron provides the following additional services:

  • Equipment Condition Reports

  • Decommissioning and Shipping Preparation

In conjunction with BOK-OPT, WJA Electron also offers backend semiconductor services, including probe card and load board services.

Important links

Contact

WJA Electron S.A.R.L.
216 Route du Mas de Soulié
46230 Cremps, France
International VAT Number: FR08503863136

© 2024 Created with InfinITiServe 

Contact

WJA Electron S.A.R.L.
216 Route du Mas de Soulié
46230 Cremps, France
International VAT Number: FR08503863136

© 2024 Created with InfinITiServe 

Solverwp- WordPress Theme and Plugin

Scroll to Top